Woodworking: Protection When Working With Wood - Ignoring Could Potentially Harm Your Health Or Kill

Woodworking: Basic Safety Tips

Woodworking can be a dangerous undertaking if you are not careful and choose to disregard safety guidelines. A circular saw, router, or other piece of power equipment can disfigure and even kill if not used properly. Even hand tools, which must be extremely sharp to provide best results, can cause serious injuries. In addition, the sawdust and fumes from wood can be harmful to the lungs if inhaled on a regular basis, especially if the wood was harvested from an orchard or tree farm where pesticides were used to control insects.

Fortunately, the advances in equipment and safety products have made it much more easy to have a safe working environment. Many tools come with built-in safety features like blade guards or emergency shut off switches. Other items such as feather boards and bench dogs can be made or purchased very inexpensively. And other parts of woodworking safety don't cost a thing, but draw instead on practice and common sense.

There are several key aspects of safety when it comes to woodworking, and they apply whether you have an advanced shop with many different power tools or are working with basic hand tools in your basement or den.

Protect Yourself
Protecting your body from accidents is a key aspect of woodworking safety. Unfortunately, people get lazy or too comfortable or they feel that the safety equipment gets in the way. A vast majority of shop accidents and injuries occur because people were not using their safety equipment.

Eye Protection
One of the main concerns when working with wood is eye protection. Wood chips can fly off when sawing, drilling, hammering, or any other task that penetrates the material. It usually happens far too quickly to be able to close your eyes or look away. Safety glasses solve this problem. In addition, if tools should break or a part comes loose, your eyes and forehead will be protected. Too many accidents have happened to just brush away this safety concern. It would be very difficult to pursue any woodworking interests with only one eye.

A good pair or safety glasses should be on everyone's list of safety equipment and should be used any time you will be cutting or removing wood with force or power tools. A quality pair of glasses will cost around $12 and could last you your entire life if properly cared for and put away when not in use. Those who need vision correction can even purchase safety classes with bifocal inserts in different strengths for under $20.

Ear Protection
Some power tools can be quite noisy and can damage hearing. Even repetitive hammering produces loud sharp noises. Many of us know a longtime woodworker who has difficulty hearing due to exposure to equipment over the years. Protecting your ears from the loud decibels is important, especially if you use noisy power equipment such as saws, on a regular basis.

Earplugs work well, earmuffs work even better, and a combination of the two is ideal when working with loud equipment that produces sound in the high decibel range. Earplugs cost just pennies, and a set of earmuffs runs about $15. You can get them with a radio and antenna built in for around $50.

Dust Collection
Over the past decade or two, extensive research has been done on the hazards of inhaling wood dust and particles, and the results show that it can cause respiratory diseases. Treated lumber or wood that came from commercial orchards is especially volatile. It is important to capture and remove these particles from the air or protect yourself from breathing them.

A work area with good ventilation will help, but even if you are working in an open area, you will be breathing in the dust if you are standing over the machine while it cuts the wood. If you plan to do a lot of cutting, drilling or sanding, it is best to have a machine that keeps the particles away from your face and prevents you from breathing them in.

There are several methods available, with the most basic being a dust mask. These lightweight masks made of filtering materials fit over your nose and mouth and are typically held in place by a rubber band. Innovative designs improve breathing and deter fogging of safety glasses. A box of 10 high quality dust masks costs around $10. They do not filter out toxic materials with fumes.

You can also purchase a dust collection system or respirator that you wear on your head or strap on your body. These systems are battery powered and allow you to move around freely. Some people feel that they are uncomfortable and impair vision, but they can be a critical way to protect your long-term health if you plan to spend a lot of time woodworking. Prices range from $50 for a basic system to over $250 for a system that also has head and eye protection.

Another option for dust collection is to use a localized unit that mounts under your worktable, saw, or other equipment and plugs into an outlet. They range from $50 to $250 depending on size, power, filtration system and other factors. A complete shop dust collection system, with a 1- horse motor and large dust ports averages around $300.

Control Your Environment
It is also important to prepare your work environment before starting a project. Be sure to put unneeded items away and pick things up off the floor. The less clutter, the less likely that something will get in the way or cause you to trip or be distracted.

In addition, good lighting will help you to see your work (and your fingers) better. Positional lighting such as a shop lamp will allow you to move around more and to direct the lighting exactly where it is needed.

Try to find an area where people will not be coming in and out. This is for your safety as for theirs, and is especially important when children are present. Be sure to unplug your equipment when you are done working and put away dangerous items such as utility knives and saw blades.

Avoid clothing that hangs loose, including long sleeves or apron strings. Long hair should be pulled back as well. Most power tools have a rotary motion that can grab and wrench a loose piece of fabric or strand of hair. Even if you are just making one cut or a quick drill hole, all it takes is one second for things to go bad. If you get in the habit of following these steps every time, you will develop good safety skills.

As one woodworking expert described, "Safety is like using your turn signal. If you do it every time you go to make a turn, even if it's just going out of the driveway, then you will remember to do it in every situation, especially when it counts the most."

But don't get so comfortable with your work and surroundings that you forget to think about what you are doing. Even though you may have done the same technique many times before, it is important to be conscious of the motions you are making and the movement of the tools.

One other environmental factor mentioned by several of the woodworkers was to have a phone nearby in case an accident does occur and you need to call for help. If you use a portable phone, be sure to put it in the same spot each time so you can go directly to it if needed. It is also a good idea to keep a first aid kit in your work area, just in case.

Take Your Time
As we all know, when we rush to finish something, mistakes tend to happen. In woodworking, this could be disastrous. Take your time, double check your clamps, footing, hand placement, power cord location, and other variables before you start the equipment. Even with hand tools, it is important to make sure you aren't going to saw through something electrical or nail into your hand.

Don't force a saw cut. If a blade gets hung up, back it out and start over. Also, wait for a tool to stop completely before taking your eye off of it or moving it away from the wood. Most drills, saws and other power tools take a few seconds to quit spinning after the power is stopped.

If a task feels uncomfortable, don't do it. You might get a tiny jitter in your belly the first time you start up the circular saw or feel the screw tighten down as you drill, and this is normal. But if you are overly apprehensive and can't hold your materials firmly or concentrate on what you are doing, back off and take a few breaths or find someone to help you with that particular step.

Another important aspect of woodworking safety is to know your tools and use them appropriately and safely. To learn more please refer to the newly published "Woodworking Beginner's Guide" mentioned at the end of this article. It describes many tools that beginners are likely to need and offers information about how to use and care for them.

Copyright © 2005 by Ferhat Gul. All rights reserved. You may redistribute this article in its unedited entirety, including this resource box, with all hyperlinked URLs kept intact. Ferhat Gul is the publisher of the brand-new "Woodworking Beginner's Guide - Tips From Experienced Woodworkers to Help You Get Started", made just for people who love woodworking. This comprehensive, yet compact woodworking introduction for beginners is easy to read and helps to save time, money and effort.

More Resources

Unable to open RSS Feed $XMLfilename with error HTTP ERROR: 404, exiting

More Crafts-Hobbies Information:

Related Articles


Making Hemp Jewelry Is Fun and Easy
Making our ideas come to life and creating them with our own hands is a great source of satisfaction for many of us. Handicrafts such as making hemp jewelry have been and continue to be very popular among both hobbyists and would-be entrepreneurs alike.
Picture Frame Crafts For Your Kids Party
One of the most popular party favors is a framed picture of the party guest taken at your kids party. He or she could be showing off a silly hat or party costume, performing an outrageous party game stunt, or wearing a face full of frosting and ice cream.
Woodworking Tools: Right Selection And Care Will Save You Money, Part 4
Woodworking: Tools Of The Trade, Part 4 - Tools For ShapingA civilization's maturity and intelligence is judged, in part, by the diversity and sophistication of its tools. When it comes to woodworking, the human race is quite advanced.
Learn Origami
Basic foldsMost of the designs that you will learn will use a square piece of paper - and most will be done with origami paper, so the directions will show a colored (or gray side to indicate color) and a white side.Also, most patterns will have an arrow that points you in the direction of where the fold should go.
Do You Really Know What You're Buying?
Recently, I had the opportunity to attend a popular gift show in my local area. My purpose in attending this gift show was to scope out my competition and the quality of their soy candles compared to what I offer.
Learn Exactly How To Repair Your Sewing Machine At Home!
My name is Tony Asef and I start my own sewing machine business 21 years ago with little knowledge of repairing sewing machine at that time. I remember very good when I was looking for someone to teach me all trick in sewing machine repair business.
50 Ways to Use Your Ribbon for Scrapbooking, Home Decor, Crafting and Fashion
Scrapbooking:Tie onto a tag, photo mat, border, or photo as an accent.Use with a hole punch to make a booklet.
Embroidery Basting Frames Use for Stabilizing Designs
Using a basting frame around designs can do a great deal to help prevent fabric puckers around a design, aid in positioning multiple or split designs and it's the best way to trap the fabric and stabilizer at the start! You will need editing software for this, but for best results, resize the frames to fit as close to the design as possible. It's also possible to use a basting frame even if you don?t have embroidery software to combine the frame with a design.
Scrapbook Photos -- Getting Adventurous With Your Layouts
When you have selected the photos for your scrapbook, you'll need to decide how best to lay them out on the pages. Don't feel obliged to follow any principles that don't suit your own design.
Getting Started With Radio Control Cars
Take note that you need to decide whether you want a radio control nitro or gas car or perhaps one that has an electric engine. You could purchase either one which is ready to run (rtr) or a kit.
More Than A Memory- A Legacy
Everyone has that box of pictures either in a close or in a garage. Even worse yet in a magnetic album.
Make Your Own Professional Gift Baskets
Ever given your family or friends a beautiful gift basket? Gift baskets are such a wonderful gift and can be given for any occasion. However, if you are like me you don't have a clue where to start, let alone how to put one together?.
Comic Book Collecting, Oh What An Enjoyable Past Time It Is!
Have you ever read a comic book before? I imagine just about everyone, at some time in their life, has read at least one comic book. But do your interests and enjoyment level go beyond that? You may have said to yourself, at sometime or another, I would like to start a comic book collection some day.
Fun with Origami!
Storing origamiThis is a great question. Many people want to hold on to their special crafts for years to come.
How to Make Sea Shell Candles
Collecting sea shells along the beach is a favorite kids summer activity. Take it one step further by transforming their seaside treasures into beautiful decorations or kids make-and-take party favors.
Craft Crocheting from Your Home
Crocheting is not only a craft but an art. Once you master the basic stitches you will be well on your way to creating masterpieces you will be pride to share with your family and friends.
Save on Kids Craft Supplies - Recycle!
Here is some information about how to collect and use recycled objects in your crafts!You can save a lot of money on arts and crafts supplies by saving things that you might ordinarily throw away! If you are building up a craft supply box for a classroom, daycare, church or school - get the parents involved by sending out list of these items so they can help out too!Make sure to prepare each item for storage. Wash and dry anything that contained food or liquids.
Embroidery Machine Use by New Owners for Good Results
Many new home embroidery machine owners have to learn on their own with little instructions and thus have to resort to the "trial and error" methods to get satisfactory results. One can certainly learn to embroidery this way but it takes time, money and patience.
Use Tags and Embellishments to Give Your Scrapbooks that Personal Yet Professional Touch
Tags are a little added touch of professionalism that adds to the overall well thought out look to your scrapbook. Tags can be used for accents, captions, and thought bubbles as well as dedications.
The Most Powerful Attribute in Antiques and Collectibles
What can increase your sales volume and make you more productive day in and day out? You've probably heard this three word statement that seperates those who wish they could do better,from those who really do.Knowledge is power!This three word statement is more than just a great philosophy.
>